Scw networker pro camera in other subnet

#Scw networker pro camera in other subnet manual#

A corresponding port must be opened on the router. The port can be set to a number other than the default TCP ports 80. You may configure a Second HTTP port that will allow you to connect to the camera via a standard web browser. Secondary DNS:В Secondary domain name server to backup the Primary DNS. Primary DNS:В Primary domain name server that translates names to IP addresses.

Invalid gateway settings may cause the failure of transmissions to a different subnet. It is recommended that you set a static local IP address for your camera.Дefault Gateway:В The gateway used to forward frames to destinations in a different subnet. IP Address:В The fixed IP address Subnet Mask: The default value is ''255.255.255.0.'' This is used to determine if the destination is the same subnet. If you have specific IP address settings provided to you by your network administrator or Internet service provider, select static IP. You can get this information from your Internet service provider (ISP). If your camera is connected directly to a DSL modem, or if you need to enter a username and password for your Internet connection, select PPPoE, then enter the username and password for your PPPoE account. Imagine Alice puts a letter in the mail that is addressed to Bob, who lives in the town right next to hers.

#Scw networker pro camera in other subnet manual#

Through subnetting, network traffic can travel a shorter distance without passing through unnecessary routers to reach its destination. SCW Sentry Pro User Manual of IR Network Speed Dome 61 Figure 6 44 Alarm Output Settings 6.6.5 Handling Exception The exception type. Also, if you are not sure what kind of connection you have, try selecting DHCP. A subnet, or subnetwork, is a network inside a network. If your camera is connected to your router, select DHCP.